Headset

Filters

Showing 1–20 of 25 results

View 20/40/All

Free Shipping on all orders over $100.

1-20 of 25 products

  • R335.00
    Quickview

    Park Tool 790 Pilot

    ,
    The 790 Pilot takes the place of the 789 Reamer for head tube facing with the HTR-1 Headtube Reamer. The 790 is used with the 690-XXL Facing Cutter and #750.2 Centering Cone Adaptor. The tool allows facing head tubes with 55.95 – 55.90mm I.D. (“Internal” 1-1/2” ZS standard).
    R335.00
    R335.00
  • R1,520.00
    Quickview

    Park Tool 690-XL Oversized Replacement Facer

    ,
    The #690-XL is a larger version of the 690 facer for the HTR Headtube Facer and Reamer. It has a nominal outside diameter of 57mm. It may be used in conjunction with the 788 reamer. It is also used with the 767 Pilot or the 768 Pilot to face only the large diameter headstubes of the "low profile" ZS-type headsets.
    R1,520.00
    R1,520.00
  • R235.00
    Quickview

    Park Tool 750.2 Centering Cone Adaptor

    ,
    The 750.2 Centering Cone Adaptor increase the size of the centering cone of the HTR-1 Headtube Reaming and Facing Set. Several headset and bottom bracket standards  use inside diameters. The 750 will allow use the HTR-1 with the IS "integrated without cups", the "low profile with cups" and the OnePointFive (1.5") EC headset standard. The HTR-1 must have the correct cutting tool and pilot for the corresponding standard.
    R235.00
    R235.00
  • R330.00
    R330.00
  • R235.00
    Quickview

    Park Tool 769 Head Tube Reamer Extension

    ,
    For use with the HTR-1 Head Tube Reaming and Facing Set, the #769 extends the reaming depth of reamers used in 1", 1-1/8" and 1-1/4" headset standards down to 27mm from the head tube face. Designed for head tubes using headsets with deep insertion cups (Chris King® SteelSet headsets and others).
    R235.00
    R235.00
  • Quickview

    Park Tool 769 Head Tube Reamer Extension

    For use with the HTR-1 Head Tube Reaming and Facing Set, the #769 extends the reaming depth of reamers used in 1", 1-1/8" and 1-1/4" headset standards down to 27mm from the head tube face. Designed for head tubes using headsets with deep insertion cups (Chris King® SteelSet headsets and others).
  • Sold out
    Quickview

    Park Tool CF-2 Park Tool Cutting Fluid

    A quality cutting fluid should be used when performing any cutting, tapping, facing, threading, or reaming procedure. CF-2 Park Tool Cutting Fluid is an environmentally friendly, soy-based cutting fluid that makes any frame cutting tool work better and last longer. Park Tool CF-2 can be effectively used on all metals. 8 oz. plastic bottle with a flip-top spout.
  • R4,555.00
    Quickview

    Park Tool CRP-2 Adjustable Crown Race Puller

    ,

    The CRP-2 is a precision tool for quickly and easily removing the headset crown race from the crown race seat of the fork.

    R4,555.00
    R4,555.00
  • R1,365.00
    Quickview

    Park Tool CRS-1 Crown Race Setting System

    ,
    The CRS-1 offers a six inserts with to install the fork crown race.  The bearing surface is spared a direct hit by using different inserts to ensure proper fit on the race. Choose the correct insert then slide the tube over the fork tube and into the top end of the insert. Using a hammer, tap firmly on the end cap of the tube and seat the race into its proper place safely and accurately. The CRS-1 set includes one universal setting tube, three 1" inserts, and three 1-1/8" inserts. The CRS-1 will work on forks of 340mm column length or less.
    R1,365.00
    R1,365.00
  • Sold out
    Quickview

    Park Tool CRS-15 Crown Race Setter for 1.5 inch column

    ,
    The CRS-15 uses two different insert rings to install bearing races on the 1.5" and 1-1/4" forks. The bearing surface is spared a direct hit by using an aluminum inserts. Using a hammer, tap firmly on the end cap of the tube and seat the race into its proper place safely and accurately. The CRS-15 will work on forks with column length of 330mm or less.
  • R1,499.00
    Quickview

    Park Tool CRS-15.2 Crown Race Setting System – Oversized

    , ,
    The CRS-15.2 uses two different insert rings to install bearing races on the 1.5" and 1-1/4" forks. The bearing surface is spared a direct hit by using an aluminum inserts. Using a hammer, tap firmly on the end cap of the tube and seat the race into its proper place safely and accurately. Included extension allows work on fork steering tubes up to 425mm.

    R1,499.00
    R1,499.00
  • R275.00
    Quickview

    Park Tool HCW-15 Headset Wrench

    Our popular and versatile Head Wrenches feature our proven “Y” head design and all headset wrench openings are laser cut to ensure a tight, accurate fit. Precise sizing is achieved by high voltage computer controlled laser technology after heat treat. Waiting until the wrench is heat treated eliminates shrinkage and expansion of the steel after the wrench is sized. It takes longer, and costs more, but it’s worth the extra effort.
    R275.00
    R275.00
  • R260.00
    Quickview

    Park Tool HCW-6 Headset Wrench

    Our popular and versatile Head Wrenches feature our proven “Y” head design and all headset wrench openings are laser cut to ensure a tight, accurate fit. Precise sizing is achieved by high voltage computer controlled laser technology after heat treat. Waiting until the wrench is heat treated eliminates shrinkage and expansion of the steel after the wrench is sized. It takes longer, and costs more, but it’s worth the extra effort.
    R260.00
    R260.00
  • R315.00
    Quickview

    Park Tool HCW-7 Headset Wrench

    Our popular and versatile Head Wrenches feature our proven “Y” head design and all headset wrench openings are laser cut to ensure a tight, accurate fit. Precise sizing is achieved by high voltage computer controlled laser technology after heat treat. Waiting until the wrench is heat treated eliminates shrinkage and expansion of the steel after the wrench is sized. It takes longer, and costs more, but it’s worth the extra effort.
    R315.00
    R315.00
  • R2,880.00
    Quickview

    Park Tool HHP-2 Bearing Cup Press

    Park Tool has the answer to your headset and cartridge cup pressing needs. The HHP-2 accurately aligns and presses 1", 1-1/8", 1-1/4", and 1.5" headset cups. In addition, it presses cartridge bearings and cups into one-piece bottom bracket shells and holds fixed cup wrenches firmly in place when removing or installing adjustable-type bottom brackets.
    R2,880.00
    R2,880.00
  • R1,065.00
    Quickview

    Park Tool HHP-3 Home Mechanic Bearing Cup Press

    Simple and economical, the HHP-3 is designed to install all sizes of head cups (1" to 1-1/2")  and one-piece bottom bracket cups. Will also press BB30 and BB90 (BB86, or BB92) system cups. The thread of the HHP-3 is 5/8" (16mm) diameter (nominally 16mm) and will work to press the BMX bottom brackets.
    R1,065.00
    R1,065.00
  • R6,065.00
    Quickview

    Park Tool HTR-1 Head Tube Reaming and Facing Set

    ,
    Proper frame preparation is very important. The HTR-1 combines reaming and facing of the head tube to create a perfect fit for most sizes of head cups.
    R6,065.00
    R6,065.00
  • R6,065.00
    Quickview

    Park Tool HTR-1B Head Tube Reaming and Facing Set

    ,
    Proper frame preparation is very important. The HTR-1B combines reaming and facing of the head tube to create a perfect fit for most sizes of head cups. HTR-1B comes with a reamer of 33.9mm for the 1-1/8 inch headset standard.    
    R6,065.00
    R6,065.00
  • R580.00
    Quickview

    Park Tool RT-1 Head Cup Remover

    The RT-1 Head Cup Remover makes headset cup removal easy. The tool is pulled through the frame until the flared ends snap in behind the cup. A blow on the tool head removes the cup.
    R580.00
    R580.00
  • R499.00
    Quickview

    Park Tool RT-2 Head Cup Remover- Oversized

    The RT-2 Head Cup Remover makes headset cup removal easy. The tool is pulled through the frame until the flared ends snap in behind the cup. A blow on the tool head removes the cup.
    R499.00
    R499.00