Frame & Fork Tools

Filters

Showing 1–20 of 42 results

View 20/40/All

Free Shipping on all orders over $100.

1-20 of 42 products

  • R279.00
    Quickview

    Finish Line Shock Oil 15wt

    , , ,
    Finish Line's Shock Oil is a premium suspension fluid formulated specifically for oil damped bicycle forks. 100% compatible with ALL suspension designs and seals.
    R279.00
    R279.00
  • R39.00
    Quickview

    Jagwire Stick-On Frame Protectors

    ,

    Jagwire Stick-On Frame Protectors - CHA063

    • Colour: Black
    • Comes in box of 6
    R39.00
    R39.00
  • R335.00
    Quickview

    Park Tool 790 Pilot

    ,
    The 790 Pilot takes the place of the 789 Reamer for head tube facing with the HTR-1 Headtube Reamer. The 790 is used with the 690-XXL Facing Cutter and #750.2 Centering Cone Adaptor. The tool allows facing head tubes with 55.95 – 55.90mm I.D. (“Internal” 1-1/2” ZS standard).
    R335.00
    R335.00
  • R645.00
    Quickview

    Park Tool FAG-2 Frame Alignment Gauge

    Many bicycles will not shift or track properly because the front and rear wheels are not in line with the frame. If these conditions still exist after wheel and derailleur adjustments, the seat stays, chain stays, and rear drop outs of the frame may be misaligned. For years the accepted method to check the alignment of the rear drop-out was to run a string on either side. This method does work to some extent. However, it is not accurate because the measurement is not taken at the drop-out. With the Park Tool Frame Alignment Gauge the alignment can be checked quickly and accurately at the drop-out. Retractable pointer to fit all sizes and types of bicycles.
    R645.00
    R645.00
  • R1,520.00
    Quickview

    Park Tool 690-XL Oversized Replacement Facer

    ,
    The #690-XL is a larger version of the 690 facer for the HTR Headtube Facer and Reamer. It has a nominal outside diameter of 57mm. It may be used in conjunction with the 788 reamer. It is also used with the 767 Pilot or the 768 Pilot to face only the large diameter headstubes of the "low profile" ZS-type headsets.
    R1,520.00
    R1,520.00
  • R2,665.00
    Quickview

    Park Tool 691 1.370″ x 24 Right Hand Threaded English Tap

    ,
    The 691 is a replacement tap for the BTS-1 Bottom Bracket Tap Set in the 1.370" x 24 TPI right hand threading standard. This tap is used on the non-drive or left side of the bike. This side of the bike drive uses a clockwise or "right hand threading".
    R2,665.00
    R2,665.00
  • R2,665.00
    Quickview

    Park Tool 692 1.370″ x 24 Left Hand Threaded English Tap

    ,
    The 692 is a replacement tap for the BTS-1 Bottom Bracket Tap Set in the 1.370" x 24 TPI left hand threading standard. This tap is used on the drive side (right side) of the bike. This side of the bike drive uses a counter-clockwise or "left hand threading".
    R2,665.00
    R2,665.00
  • R2,665.00
    Quickview

    Park Tool 692 1.370″ x 24 Left Hand Threaded English Tap

    ,
    The 692 is a replacement tap for the BTS-1 Bottom Bracket Tap Set in the 1.370" x 24 TPI left hand threading standard. This tap is used on the drive side (right side) of the bike. This side of the bike drive uses a counter-clockwise or "left hand threading".
    R2,665.00
    R2,665.00
  • R235.00
    Quickview

    Park Tool 750.2 Centering Cone Adaptor

    ,
    The 750.2 Centering Cone Adaptor increase the size of the centering cone of the HTR-1 Headtube Reaming and Facing Set. Several headset and bottom bracket standards  use inside diameters. The 750 will allow use the HTR-1 with the IS "integrated without cups", the "low profile with cups" and the OnePointFive (1.5") EC headset standard. The HTR-1 must have the correct cutting tool and pilot for the corresponding standard.
    R235.00
    R235.00
  • R3,000.00
    Quickview

    Park Tool 758.2 Reaming and Facing Cutter for 1.5 inch headset

    ,
    The Park Tool 758.2 will ream and face the head tubes of bike using the OnePointFive Interface Standard. The 758.2 is designed for use with the Park Tool HTR-1 or HTR-1B Headtube Facer and Reamer. Must also be used with the 750 Centering Cone Adaptor.
    R3,000.00
    R3,000.00
  • R330.00
    R330.00
  • R235.00
    Quickview

    Park Tool 769 Head Tube Reamer Extension

    ,
    For use with the HTR-1 Head Tube Reaming and Facing Set, the #769 extends the reaming depth of reamers used in 1", 1-1/8" and 1-1/4" headset standards down to 27mm from the head tube face. Designed for head tubes using headsets with deep insertion cups (Chris King® SteelSet headsets and others).
    R235.00
    R235.00
  • R7,515.00
    Quickview

    Park Tool BFS-1 Bottom Bracket Facing Set

    ,
    The Bottom Bracket Facing Set is designed to be a complete self-contained facing set, combining top quality precision parts with ease of use. Simply install the threaded inserts using the facer handle, then insert the facing tool through the guides and install the tension spring and speed nut. After applying a liberal amount of cutting oil, the BFS-1 easily cuts the shell material, giving you a clean, faced surface. Now you're ready to install the bottom bracket.
    R7,515.00
    R7,515.00
  • R10,620.00
    Quickview

    Park Tool BTS-1 Bottom Bracket Tapping & Facing Set

    ,
    The BTS-1 is a precision tool system which provides a piloted means of tapping the threads in the bottom bracket shell of a frame. After tapping, the taps act as guides to keep the included facing cutter perfectly square with the axis of the bottom bracket for cleanup of the faces of the bottom bracket shell. The BTS-1 includes English taps, 1.370" x 24 TPI right hand thread for the adjustable cup, and 1.370" x 24 TPI left hand thread for the fixed cup. Italian thread taps, 36mm x 24 TPI right hand thread (Part #693), for the adjustable and fixed cups are available as accessories.
    R10,620.00
    R10,620.00
  • R6,065.00
    Quickview

    Park Tool CRC-1 Crown Race Cutting Tool

    To ensure proper headset performance and longevity, special attention must be given to accurately machine the fork’s crown race seat. The CRC-1 is a professional quality machining tool for milling both the outer edge and lower surfaces of the crown race seat.
    R6,065.00
    R6,065.00
  • R4,555.00
    Quickview

    Park Tool CRP-2 Adjustable Crown Race Puller

    ,

    The CRP-2 is a precision tool for quickly and easily removing the headset crown race from the crown race seat of the fork.

    R4,555.00
    R4,555.00
  • R1,365.00
    Quickview

    Park Tool CRS-1 Crown Race Setting System

    ,
    The CRS-1 offers a six inserts with to install the fork crown race.  The bearing surface is spared a direct hit by using different inserts to ensure proper fit on the race. Choose the correct insert then slide the tube over the fork tube and into the top end of the insert. Using a hammer, tap firmly on the end cap of the tube and seat the race into its proper place safely and accurately. The CRS-1 set includes one universal setting tube, three 1" inserts, and three 1-1/8" inserts. The CRS-1 will work on forks of 340mm column length or less.
    R1,365.00
    R1,365.00
  • Sold out
    Quickview

    Park Tool CRS-15 Crown Race Setter for 1.5 inch column

    ,
    The CRS-15 uses two different insert rings to install bearing races on the 1.5" and 1-1/4" forks. The bearing surface is spared a direct hit by using an aluminum inserts. Using a hammer, tap firmly on the end cap of the tube and seat the race into its proper place safely and accurately. The CRS-15 will work on forks with column length of 330mm or less.
  • R1,499.00
    Quickview

    Park Tool CRS-15.2 Crown Race Setting System – Oversized

    , ,
    The CRS-15.2 uses two different insert rings to install bearing races on the 1.5" and 1-1/4" forks. The bearing surface is spared a direct hit by using an aluminum inserts. Using a hammer, tap firmly on the end cap of the tube and seat the race into its proper place safely and accurately. Included extension allows work on fork steering tubes up to 425mm.

    R1,499.00
    R1,499.00
  • R170.00
    Quickview

    Park Tool CSB-1 Carbon Saw Blade

    ,
    12” Tungsten steel hacksaw blade specially designed to smoothly cut carbon composite handlebars, forks, seat masts, seat posts, etc.  Fits Park Tool SAW-1 Hacksaw and most 12” hacksaws. The CSB-1 is designed for use with the SG-8 Saw Guide.  
    R170.00
    R170.00